Blog/Engineering
Engineering

Danfoss AK-SM800A Vulnerabilities: Six Unpatched Pre-Login Flaws in Supermarket Fridge Controllers, What Is Confirmed, and a Store Checklist for Gulf and Egypt Retailers

D
DanteNov 16, 2026 · 8 min read
iFynx original illustration: Danfoss AK-SM800A supermarket fridge controller warning, six unpatched flaws, thermometer rising from -18 to 50 degrees

UNPATCHED · NO CVE YET · NOT KNOWN TO BE EXPLOITED · CHECKED 22:55 ASIA/GAZA, 16 NOV 2026

Six unpatched flaws in Danfoss AK-SM800A refrigeration controllers can let an attacker run code as root without logging in. They affect every firmware version up to and including 5.3.2, there is no fix yet, and the only defence that works today is taking these controllers off the internet.

The flaws were found by Carlo Meijer of Dutch firm Midnight Blue. Germany’s BSI confirmed them on 13 November and corrected an earlier note: it can no longer rule out that the newest firmware, 5.4.0, is affected too. Belgium’s CCB and Ireland’s NCSC issued urgent warnings.

These are the controllers that run supermarket fridges and freezers. The same product family was involved in earlier tampering that warmed store fridges in France and across Europe. In the Gulf and Egypt, where a defrost cycle in summer heat can spoil stock fast, any store, cold room or central kitchen running AK-SM800A should act now.

iFynx original illustration of a Danfoss AK-SM800A supermarket fridge controller warning: six unpatched flaws, no CVE yet, with a thermometer rising from -18 to 50 degrees
Original iFynx illustration. Based on Midnight Blue’s research and the BSI, CCB and NCSC Ireland advisories.

At iFynx we build connected back ends and dashboards for retail, logistics and food businesses in the Gulf and Egypt, so a story about the boxes that keep chilled stock cold lands close to home. Nobody has covered it in Arabic or for this region yet. This guide sticks to what the researchers and national agencies have published. It contains no exploit details, which the researchers themselves are withholding.

What the researchers found, in plain words

  • Six pre-login code-execution bugs. Midnight Blue describes six stack-based buffer overflows. Five sit in web request handlers that need no login, inside a program that runs as root. Their demo got full code execution on firmware 3.3.0, and they say the same bugs exist in 5.3.2.
  • Strict mode is not a wall. Strict session control, the default since firmware 4.0, blocks almost everything before login. But the sixth bug is in the gateway that enforces Strict mode itself, and it crashed in the researchers’ emulator. They say more work could turn it into code execution.
  • No secure boot, no stack canaries. The controllers don’t use their chip’s secure-boot features. The researchers argue that malicious code could survive a factory reset and firmware update, or leave a unit unusable until replaced. They did not demonstrate this.
  • Found in under an hour. Meijer found the bugs by manually reviewing firmware that Danfoss offers for download. The researchers believe more of the same kind exist.

How an attack on a store fridge works

You don’t need exploit details to understand the risk. This is the general path the advisories warn about:

Controller reachable from the internet (often via a contractor’s 4G modem)→Pre-login bug on the web interface→Root control of the AK-SM800A→Setpoints changed or defrost started, alarms hidden→Chilled and frozen stock warms and is thrown away

Every step after the first depends on the controller being reachable. That is why every agency puts the same action first: cut internet exposure.

How we got here: a two-month timeline

11 Oct 2026 Attacks on refrigeration in French supermarkets begin. CERT-FR’s alert covers Danfoss AK-SM and AK-SC series and Copeland and Dixell xweb controllers.
13 Oct Danfoss advises Dutch customers to disconnect systems from the internet. It later says most units hit in France were older models or ran outdated firmware.
2 Nov A second wave hits stores in Belgium, Sweden, Estonia, Ireland and other countries. Some fridges and freezers were set to 50°C or switched to defrost.
Nov, same week as BSI Midnight Blue discloses six new pre-login flaws in the AK-SM800A, details withheld.
13 Nov BSI confirms firmware up to at least 5.3.2 is affected, corrects itself on 5.4.0, and urges operators to keep devices off the internet.
16 Nov, 22:55 Gaza No CVEs and no Danfoss advisory on its advisories page for these flaws yet.

Verified vs not known

Confirmed Not known yet
Six pre-login flaws in AK-SM800A, firmware up to 5.3.2 (Midnight Blue, BSI) CVE IDs and severity scores
Root code execution demonstrated on firmware 3.3.0 Whether 5.4.0 is affected (BSI cannot rule it out)
No secure boot, no stack canaries A fix date from Danfoss
BSI has no information on exploitation of these six flaws Who was behind the French and European store attacks
Danfoss: AK-SM800A must not be directly reachable from the internet, on any version How many controllers are exposed online (no agency gave a number)

Why this matters more in the Gulf and Egypt

Supermarket chains, hypermarkets, cold-chain warehouses, central kitchens and pharmacies with cold rooms across the UAE, Saudi Arabia, Qatar, Kuwait and Egypt depend on remotely managed refrigeration. Maintenance is often outsourced, and contractors commonly reach controllers through a 4G router in the plant room. That is the exact exposure Midnight Blue and the agencies tell operators to hunt down.

The European attacks show the business impact: warmed fridges, discarded meat and dairy, stores pulling chilled and frozen ranges as a precaution. In a region where outdoor temperatures stay high for much of the year, a forced defrost leaves less time before food-safety limits are crossed. Food-safety rules then decide what has to be destroyed, so a cyber incident becomes a stock write-off and a compliance event at once.

Don’t patch and relax. Midnight Blue goes as far as recommending against spending scarce security resources on patching first. Belgium’s and Ireland’s agencies say updating firmware, changing default passwords and turning on Strict mode help, but are not enough alone. A firewall rule that allows only your service company’s IP addresses is a stop-gap, not a fix.

Store manager’s checklist: do this before the next shift

  1. Find every controller. List each AK-SM800A (and other AK-SM, AK-SC or xweb units) in every store, warehouse and kitchen, with firmware version and who maintains it.
  2. Find every path in. Ask each refrigeration contractor in writing how they connect: public IP, port forwarding, 4G or 5G modem, or VPN. Count modems you didn’t know about as exposure.
  3. Cut public exposure now. Remove port forwards and public IPs. Unplug or lock down contractor modems until a VPN or private APN is in place.
  4. Move remote access behind a VPN or private network. If you must keep an IP allow-list for a few days, make it tight and time-limited.
  5. Check for tampering. Compare temperature setpoints, defrost schedules, alarm thresholds, user accounts and remote-access settings against your last known-good configuration.
  6. Watch the cases, not just the screen. An attacker with root could hide changes from logs, so use independent temperature loggers or probes for the next weeks.
  7. If anything looks wrong, change all credentials, confirm connected equipment works, and follow your food-safety procedure for affected stock.
  8. Read your contract before cutting a contractor off. The agencies note that service and insurance terms may require monitoring, so set up protected access rather than going dark.
  9. Still update and use Strict mode, with strong unique passwords, as extra layers.
  10. Track the fix. Watch Danfoss’s advisories page and the BSI and CCB notices for CVEs and patched firmware.

How iFynx can help

iFynx is a software house serving retailers, logistics and food businesses across the Gulf and Egypt. We can help you:

  • Map every internet-facing device in your stores and cold chain, including contractor modems, and build a live asset register.
  • Design secure remote access for refrigeration and building-management contractors, with VPN, per-vendor accounts and logging.
  • Build an independent temperature-monitoring dashboard and alerting that doesn’t rely on the controller’s own screen.
  • Write the incident and food-safety runbook your store teams follow when cold-chain readings look wrong.

Talk to the iFynx team

Frequently asked questions

Which Danfoss controllers are affected by the six new flaws?

Danfoss AK-SM800A store refrigeration controllers. Midnight Blue says all firmware versions up to and including 5.3.2 are affected. Germany’s BSI says it cannot rule out that the newer 5.4.0 is also affected, and the researchers say 5.4.0 does not fix them.

Is there a patch or CVE for the Danfoss AK-SM800A vulnerabilities?

Not yet. CVE IDs are listed as pending, Danfoss had published no advisory or fix date for these six flaws when we checked, and the researchers are withholding technical details during coordinated disclosure.

Are the new Danfoss flaws being exploited?

BSI says it has no information that these six flaws are being exploited. Separately, supermarkets in France and across Europe had refrigeration settings tampered with in October and November 2026, and Danfoss confirmed its products were involved in several cases. No link between those attacks and the new flaws has been shown.

What should a supermarket or cold-store operator do today?

Take every AK-SM800A off the public internet, including any reached through a contractor’s 4G or 5G modem, and allow remote access only through a VPN or private network. Then check setpoints, defrost schedules, alarms, user accounts and remote-access settings for changes you did not make.

Is enabling Strict mode or updating firmware enough?

No. The researchers found a pre-login memory-corruption bug in the very component that enforces Strict mode, and the Belgian and Irish agencies say updates, password changes and Strict mode help but are not enough on their own. Removing internet exposure comes first.

Sources

Related reading